Also searched as PCMC
CPCB IV+ compliant silent and industrial diesel generators from 25 to 1250 kVA, on hire across Pimpri Chinchwad & Chakan — for standby, shutdowns, bridge power and events. Sized on your actual starting load, quoted itemised.
PCMC and the Chakan belt form one of India's densest automotive and engineering clusters — thousands of ancillary units feeding OEM assembly lines that run three shifts. The critical fact for power is that most of these plants are not merely inconvenienced by an outage; they are penalised for it. A press shop or paint line that stops mid-cycle scraps work in progress, and a tier-one supplier that misses a delivery window against an OEM schedule pays for it commercially, not just in lost hours.
The bulk of hiring here is industrial standby and bridge power: units waiting on a sanctioned MSEDCL load enhancement, plants running a shutdown or maintenance window, new sheds in Chakan and Talegaon energising before their permanent connection lands, and foundries and heat-treatment shops covering scheduled feeder maintenance. Construction and infrastructure projects along the Ravet–Chikhali corridor make up most of the rest.
Ancillary units typically hire in the 125–500 kVA band for a single shed or line. Foundries, induction furnaces and heat treatment push well past that, commonly 750–1250 kVA or paralleled sets. Site offices and labour camps sit at 25–62.5 kVA.
A rough guide. The rating that matters is the one your load needs at start-up, not while running — get this wrong and the set trips instead of saving you.
| Application | Typical rating | Note |
|---|---|---|
| Site office, labour camp, small shop | 15 – 30 kVA | Lighting, fans, a few machines. Usually the cheapest thing on the site. |
| Retail, clinic, restaurant, small office | 30 – 62.5 kVA | Add headroom if air-conditioning restarts all at once after an outage. |
| Small manufacturing unit, single shed | 82.5 – 180 kVA | Motor starting current, not running load, is what decides the rating. |
| Mid-size plant, cold storage | 200 – 500 kVA | Compressor inrush on restart can be several times running load. Undersizing here trips the set. |
| Foundry, furnace, large plant, hospital | 500 – 1250 kVA | Often paralleled sets rather than one large unit, for redundancy and part-load efficiency. |
| Township, large event, data facility | 1250 kVA and above | Synchronised sets with load sharing, plus a defined redundancy level. |
We quote per site rather than publish a rate card, because kVA, duration, fuel arrangement and operator cover move the number independently. What we can publish is exactly what the number is made of.
Billed per day or per month by kVA rating. Longer hire lowers the effective daily rate substantially.
Almost always the largest line on an industrial hire. Billed on actual consumption or reimbursed against meter readings — agree which, in writing, before the set arrives.
Required for larger sets and most industrial hires. Check whether the quote covers one shift or round the clock.
To site and back, plus craning or placement where access is tight. A common source of dispute when quoted vaguely.
Day tank, external tank, spill containment where required by site or consent conditions.
18% on hire of goods. Confirm whether a quoted figure is inclusive or exclusive.
Ask us these too. Vagueness on fuel measurement or CPCB documentation is the answer.
Emission compliance is now a legal condition of operation for newer sets, not a specification preference. Ask for documentation, not assurance.
Sizing on running load rather than motor starting current is the most common cause of a hired set tripping repeatedly.
The single largest cost and the most frequent billing dispute. Settle the measurement method before delivery.
One-shift operator cover on a plant running three shifts is a gap you will discover at 2am.
A standby set that cannot be fixed within hours is not standby. Get the commitment in the contract.
Ask specifically about return transport. It is routinely omitted from the headline number.
Matters for residential proximity, hospitals, hotels and event work, and for local noise-limit conditions.
Extension rates and early-return terms are easier to agree before you need them.
Hire is quoted per site rather than from a price list, because four things move the number independently: kVA rating, duration, whether diesel is supplied by us or reimbursed on meter reading, and whether an operator is included round the clock or for a single shift. Transport, positioning and 18% GST are separate. Tell us your load and duration and you get an itemised quote — not a headline rate that grows later.
Size on starting load, not running load. Motors, compressors and air-conditioning draw several times their running current at start-up, and sizing on the running figure is the single most common reason a hired set trips repeatedly. Ancillary units typically hire in the 125–500 kVA band for a single shed or line. Foundries, induction furnaces and heat treatment push well past that, commonly 750–1250 kVA or paralleled sets. Site offices and labour camps sit at 25–62.5 kVA. If you can share a load list or your last MSEDCL bill, we will size it properly rather than guess.
Yes. CPCB IV+ emission norms apply to new diesel generator sets in India, and compliance is a condition of lawful operation rather than an optional specification. We supply compliant sets and provide documentation with the hire. If a supplier cannot produce a certificate, that is your answer about the set.
Yes — acoustic-canopy sets are the default for anything near residential areas, hospitals, hotels or events, and are usually necessary to stay within local noise limits. Open sets are only sensible deep inside an industrial premises where noise is not a constraint.
For standard ratings within Pimpri Chinchwad & Chakan, same-day or next-day placement is normally achievable subject to availability, since transport distances are short. Larger sets, paralleled configurations and anything needing craning into a constrained site need more notice. Emergency breakdown cover is best arranged before you need it, not during.
Operators are provided for larger and industrial hires — specify whether you need single-shift or 24-hour cover, because that assumption is where quotes diverge. Diesel is either supplied by us or reimbursed against meter readings; we agree the method in writing before delivery, since it is the largest cost line and the most common billing dispute in this industry.
Rent for anything temporary, seasonal or uncertain — a shutdown, a monsoon or harvest season, an event, a bridge until your sanctioned load arrives, or a site whose long-term power need you cannot yet predict. Buy when you need permanent standby and can carry the maintenance, AMC, fuel storage, compliance and eventual replacement. Rental also keeps the compliance burden with the supplier, which matters as emission norms keep moving.
DG set rental · Pimpri Chinchwad
Tell us what you need. We reply within 24 hours — or call now for an instant answer.